How To Setup VLAN Trunk Using Bridge on Mikrotik Router

In this tutorial, shows you how to configure a VLAN for small networks (SoHo) by using a mikrotik router. This small network has 2 lan gateway (cable and wifi) that is set on in a single physical interface. For a local network via a cable created VLAN with ID 10 and the via wifi created with VLAN ID 20. For detailed network topology as follows :

topology vlan trunk for small network

VLAN Trunk Configuration using winbox on Mikrotik Router

You can follow the steps below to configure VLAN trunk on mikrotik router using winbox :
1. Create trunk bridge to foward tagged packet

How To Setup VLAN Trunk Using Bridge on Mikrotik Router

2. Add port or interface that you want to foward the VLAN in the trunk-bridge

How To Setup VLAN Trunk Using Bridge on Mikrotik Router

3. Create new VLAN interface on bridge-trunk interface

How To Setup VLAN Trunk Using Bridge on Mikrotik Router

4. Enter IP Address for each of VLAN interface

How To Setup VLAN Trunk Using Bridge on Mikrotik Router

5. Setup DHCP Server for interface Vlan-10 and Vlan-20 with public DNS or DNS your ISP.
6. Connect ether 2 mikrotik router using LAN cable to switch manageable and configure the switch as desired.
7. Configure ether 1 in order to connect to the internet.
  
Please watch this video tutorial

1 Response to "How To Setup VLAN Trunk Using Bridge on Mikrotik Router"

dit said...

halu...

how to configure both vlan10 and vlan20 to communicate each other?